Which firmware for Linksys WRT54GL 1.1 and IPv6

[Gert Doering]

Hi,

to followup on this.

On Sat, Apr 03, 2010 at 08:07:48PM +0200, Jens Link wrote:
> I just wanted to flash a WRT54GL 1.1 with OpenWRT (8.09.2) and configure
> IPv6 with it. This doesn't work (insmod ipv6 insmod: unresolved symbol
> tcp_destroy_sock This is documented, but the ticket is closed as "works
> for me".)

I saw the same problem at a training at a customer's site, with customer-
installed WRTs (so I don't know exactly which kernel they used).

I tried to reproduce this at home today, to be able to open a bug report
- and couldn't!

Test setup: WRT54GL v1.1, OpenWRT 8.09.02, from here:

http://downloads.openwrt.org/kamikaze/8.09.2/brcm-2.4/openwrt-wrt54g-squashfs.bin

installed via "tftp push via boot_wait" (standard method).  Installed
IPv6 module via "opkg install kmod-ipv6" next, and everything behaved
as expected...

So I can only speculate that *some* kernel+squashfs bundles might have
problems - but I'm not going to test all WRT bundles now to see if one
of them might fail.  "wrt54g" definitely works :-)


(For the record, the brcm-2.4/...-wrt54g-...) binary for the newly 
released 10.03 openwrt also works)

Gert Doering
        -- NetMaster
-- 
Total number of prefixes smaller than registry allocations:  150584

SpaceNet AG                        Vorstand: Sebastian v. Bomhard
Joseph-Dollinger-Bogen 14          Aufsichtsratsvors.: A. Grundner-Culemann
D-80807 Muenchen                   HRB: 136055 (AG Muenchen)
Tel: +49 (89) 32356-444            USt-IdNr.: DE813185279