fixed configuration 48 port layer 3 routers

[David Freedman]

oh, and the reason this isn't fixed configuration is that I was looking at the 4948 (which unfortunately only does in s/w) and went off on a complete tangent :)


------------------------------------------------
David Freedman
Group Network Engineering 
Claranet Limited
http://www.clara.net



-----Original Message-----
From: ipv6-ops-bounces+david.freedman=uk.clara.net at lists.cluenet.de on behalf of David Freedman
Sent: Fri 11/7/2008 00:43
To: Truman Boyes; Mike Leber
Cc: ipv6-ops at lists.cluenet.de
Subject: RE: fixed configuration 48 port layer 3 routers
 

>
> Hi, I'd like to hear what solutions people are using as a fixed  
> configuration 48 port layer 3 router (for customer aggregation) that  
> supports OSPFv3 and IPv6 (BGP a plus but not required), and a rough  
> price that it cost.
>

for the price, you can use Cisco Catalyst 4900M, if you believe the marketing figures

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6021/product_data_sheet0900aecd8017a72e.html

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6021/ps9310/Data_Sheet_Cat_4900M.html

> layer 3 wirespeed IPv6 and IPv4 routing

250 mpps ipv4
125 mpps ipv6
(/me imagines fixed 64B packets and not imix)

> OSPFv3
yup

> at least 8000 ARP entries *with* IPv6 enabled
TCAM can hold 64K Entries. 

> 48 ports
Check, modular on 4900M

> 10/100/1000 copper
Yup

> optional 10GE uplink
if you buy the modules, you can have lots

> BGP a plus, but not required.
most certainly 

------------------------------------------------
David Freedman
Group Network Engineering 
Claranet Limited
http://www.clara.net



-----Original Message-----
From: ipv6-ops-bounces+david.freedman=uk.clara.net at lists.cluenet.de on behalf of Truman Boyes
Sent: Fri 11/7/2008 00:26
To: Mike Leber
Cc: ipv6-ops at lists.cluenet.de
Subject: Re: fixed configuration 48 port layer 3 routers
 
Hi Mike,

Juniper MX 240s support:

* IPv6 (RA, DHCPv6)
* OSPFv3
* CoS, L2/L3 aggregation
* L2VPN/ VPLS/ Internet / L3VPN
* 4 slot chassis, 5RU high
* Each DPC (line card) can have 40GE ports.
* Hierarchical shaping (on inner and outer vlans)
* 240Gbps switching fabric, wirespeed forwarding, etc ,etc.
* yes it supports BGP
* Runs standard JUNOS

Truman


On 6/11/2008, at 7:03 PM, Mike Leber wrote:

>
> Hi, I'd like to hear what solutions people are using as a fixed  
> configuration 48 port layer 3 router (for customer aggregation) that  
> supports OSPFv3 and IPv6 (BGP a plus but not required), and a rough  
> price that it cost.
>
> We've been evaluating (and using) various boxes over the years and  
> so far all the solutions have the same high per port cost as a core  
> router.
>
> I'm looking for something the is the same or close to the cost we'd  
> see for fixed configuration IPv4 routers, so that we have a good  
> answer for what to tell people to use (other than core routers or  
> quagga and switches).
>
> Considerations are:
>
> layer 3 wirespeed IPv6 and IPv4 routing
> OSPFv3
> at least 8000 ARP entries *with* IPv6 enabled
> 48 ports
> 10/100/1000 copper
> optional 10GE uplink
> BGP a plus, but not required.
>
> Mike.
>
> -- 
> +---------------- H U R R I C A N E - E L E C T R I C  
> ----------------+
> | Mike Leber        Wholesale IPv4 and IPv6 Transit      510 580  
> 4100 |
> | Hurricane Electric                                            
> AS6939 |
> | mleber at he.net     Internet Backbone & Colocation      http:// 
> he.net |
> + 
> ---------------------------------------------------------------------+
>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.cluenet.de/pipermail/ipv6-ops/attachments/20081107/5921604d/attachment-0001.html