<div>Sorry for the flood, but to avoid false information, I checked in my lab and ipv6 commands are not available with IP Services either, unless using a Dual SDM Template.</div><div><br></div><div>Switch#sh ver | in ^License|^Cisco</div>
<div>Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE, RELEASE SOFTWARE (fc1)</div><div>License Level: ipservices</div><div>License Type: Permanent</div><div>Switch#sh sdm pref | in current</div>
<div> The current template is "desktop default" template.</div><div>Switch#conf t</div><div>Enter configuration commands, one per line. End with CNTL/Z.</div><div>Switch(config)#int vl 1</div><div>Switch(config-if)#ipv6?</div>
<div>% Unrecognized command</div><div><br></div><div>As mentioned in the Configuration Guide, it is required to change to Dual SDM template with the 'sdm prefer dual-ipv4-and-ipv6' then reload the switch in order to have ipv6 commands available.</div>
<div><br></div><div>Andras</div><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Nov 21, 2012 at 4:04 PM, Tóth András <span dir="ltr"><<a href="mailto:diosbejgli@gmail.com" target="_blank">diosbejgli@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<div><br></div><div>In 15.x releases IPv6 static and RIP routing is supported with IP Base as well. This is the case for the regular, -E, and -X series switches.</div>
<div><br></div><div>To use all IPv6 features in this chapter, the switch or stack master must be running the IP services feature set. Switches running the IP base feature set support only IPv6 static routing and RIP for IPv6.</div>
<div><br></div><div><a href="http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/15.0_2_se/configuration/guide/swipv6.html" target="_blank">http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/15.0_2_se/configuration/guide/swipv6.html</a></div>
<div><br></div><div><a href="http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_58_se/configuration/guide/swipv6.html" target="_blank">http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_58_se/configuration/guide/swipv6.html</a><br>
</div><div><br></div><div>Best regards,</div><div>Andras</div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Nov 21, 2012 at 1:15 PM, Nick Hilliard <span dir="ltr"><<a href="mailto:nick@foobar.org" target="_blank">nick@foobar.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>On 21/11/2012 11:50, Ignatios Souvatzis wrote:<br>
> Is that still so? When I talked years ago to our networking people,<br>
> they said they would buy the upgraded hardware the next time they<br>
> replaced anyway, as upgrading the firmware for new features was<br>
> prohibitive. I'd assumed that v6 was available in new equipment since<br>
> at least several years.<br>
<br>
</div>There are three licenses:<br>
<br>
LAN base: static ipv4 routing only, no dynamic ipv4 routing, no ipv6<br>
IP base: static + rip/ospf/eigrp ipv4 routing, no ipv6.<br>
IP Services: static/rip/ospf/eigrp/isis/bgp ipv4 routing, static/rip/eigrp<br>
ipv6 routing.<br>
<br>
There's no isis/bgp4 ipv6 routing support on this platform at the moment.<br>
<br>
Assuming a 24 port C3560-X switch, the GPL cost is:<br>
<br>
LAN Base: $0<br>
IP Base: C3560X-24-L-S= $900<br>
IP Services: C3560X-24-L-E= $4900<br>
<br>
The switch hardware itself (WS-C3560X-24T-L) has a list price of $3400.<br>
<br>
I.e. the license to get even base ipv6 L3 functionality (e.g. interface<br>
configuration) costs almost 50% more than the price of the switch.<br>
<br>
This seriously sucks.<br>
<span><font color="#888888"><br>
Nick<br>
<br>
</font></span></blockquote></div><br></div>
</div></div></blockquote></div><br></div>