IPv6 PPP/RADIUS and PD on Redback SEOS 6.4.1

[David Freedman]

>
>so I'm forced to work with PPPoE. They will also insert a customer-tag in
>the PADI such that the circuit can be identified regardless of the
>username/password being used by the user.

Right, so sticking with PPP for the moment...

>
>> I can see the packet is sourced from your IID correctly
>
>IID?

Sorry, Interface IDentifier
>
>> , can you get a PPP
>> debug (I.e debug PPP packet) from the CPE?
>
>Sure:
>
>035763: .Feb 28 22:11:27.185: Vi1 PPP: I pkt type 0x8021, datagramsize 12
>link[ip]
>035764: .Feb 28 22:11:27.185: Vi1 IPCP: I CONFREQ [REQsent] id 126 len 10
>035765: .Feb 28 22:11:27.185: Vi1 IPCP:    Address 94.247.1.1
>(0x03065EF70101)
>035767: .Feb 28 22:11:27.189: Vi1 PPP: I pkt type 0x8057, datagramsize 16
>link[ipv6]
>035768: .Feb 28 22:11:27.189: Vi1 PPP: I pkt type 0x8057, datagramsize 16
>link[ipv6]
>035768: .Feb 28 22:11:27.189: Vi1 IPCP: O CONFACK [REQsent] id 126 len 10
>035769: .Feb 28 22:11:27.189: Vi1 IPCP:    Address 94.247.1.1
>(0x03065EF70101)
>035770: .Feb 28 22:11:27.189: Vi1 IPCP: I CONFNAK [ACKsent] id 1 len 10
>035771: .Feb 28 22:11:27.189: Vi1 IPCP:    Address 94.247.1.8
>(0x03065EF70108)
>035772: .Feb 28 22:11:27.189: Vi1 IPCP: O CONFREQ [ACKsent] id 2 len 10
>035773: .Feb 28 22:11:27.189: Vi1 IPCP:    Address 94.247.1.8
>(0x03065EF70108)
>035774: .Feb 28 22:11:27.189: Vi1 IPV6CP: I CONFREQ [REQsent] id 116 len
>14
>035775: .Feb 28 22:11:27.189: Vi1 IPV6CP:    Interface-Id
>0230:88FF:FE16:EAFF (0x010A023088FFFE16EAFF)
>035776: .Feb 28 22:11:27.189: Vi1 IPV6CP: O CONFACK [REQsent] id 116 len
>14
>035777: .Feb 28 22:11:27.189: Vi1 IPV6CP:    Interface-Id
>0230:88FF:FE16:EAFF (0x010A023088FFFE16EAFF)
>035778: .Feb 28 22:11:27.193: Vi1 IPV6CP: I CONFACK [ACKsent] id 1 len 14
>035779: .Feb 28 22:11:27.193: Vi1 IPV6CP:    Interface-Id
>021D:A2FF:FE27:27A0 (0x010A021DA2FFFE2727A0)
>035780: .Feb 28 22:11:27.213: Vi1 PPP: I pkt type 0x8021, datagramsize 12
>link[ip]
>035781: .Feb 28 22:11:27.213: Vi1 IPCP: I CONFACK [ACKsent] id 2 len 10
>035782: .Feb 28 22:11:27.213: Vi1 IPCP:    Address 94.247.1.8
>(0x03065EF70108)
>035783: .Feb 28 22:11:28.161: %LINEPROTO-5-UPDOWN: Line protocol on
>Interface Virtual-Access1, changed state to up
>035784: .Feb 28 22:11:28.165: Vi1 LCP: O ECHOREQ [Open] id 1 len 12 magic
>0x4270B27C
>035785: .Feb 28 22:11:28.185: Vi1 LCP-FS: I ECHOREP [Open] id 1 len 12
>magic 0x7E3D3E0F
>035786: .Feb 28 22:11:28.185: Vi1 LCP-FS: Received id 1, sent id 1, line
>up


If PPPoE I would try "debug pppoe data" next!

Dave.
 

>
>-- 
>Met vriendelijke groet,
>
>Arjan van der Oest
>Senior Network & Systems Engineer / Security Officer
>
>Voiceworks BV - Editiestraat 29 - 1321 NG Almere
>Mobile : (+31) (0)36 7600 197
>Voiceworks winnaar Gouden FD Gazelle Award 2010 http://bit.ly/eksf8V
>